Instructions:
Cut out 2 circles from the blue felt the same size as the CD (it is easiest to trace the CDs). Glue the blue felt circles onto one side of each of the CDs, covering the one side completely.
For the front side of Poliwag: Cut one white circle out of left about half the size as the other circles. Glue it on one of the CDS you covered with blue; make it off center a little bit.
Glue on the pink bead and the wiggly eyes as shown below. Glue the black yarn into a spiral, starting from the inside of the white circle and work your way out.
For the back of Polywag: Glue on the feather! I liked it best laying on it's side sticking out over the edge of the CD.
Now for the slightly tricky part. Once the glue on the 2 CDs is dry, you want to attach them at the top and at an angle. This will make it so Polywag can stand! Glue the top edge together and make sure the bottom edges are about 3 inches apart. Cut a piece of cardboard about 3 inches long by 4 inches wide. Cover the cardboard with a piece of blue felt with 2 feet shape cut out.
Glue the bottom part of the CDS onto the cardboard so the feet stick out the front. TA-DA!
- See a larger photo of this craft completed by Éric.
|
| 