Eye Mask Template

If you will be cutting out and decorating this mask, consider printing it on heavy cardstock. Before you cut out the eye holes you might want to hold the mask up to your face to make sure they are in the right spot for you.

Use a hole puncher to make the holes on the side. Before punching the holes, you might want to reinforce them by putting a small piece of clear tape over the back and/or front of the hole. Tie yarn or even thin elastic through the holes to hold the mask on your face. Instead of punching holes and adding ties, you can also attach a "handle" to your mask to hold it in place. For this, you can use a strawm a popsicle-type craft stick, pencil, or anything else long and thin.

For best results, save the mask graphic to your computer and print it out using a graphics program. See this page for printing help.