- Age Guideline: 6 Years and Up
- Time Required: 30 minutes
The above age and time guidelines are estimates. This project can be modified to suit other ages and may take more or less time depending on your circumstances.
Materials Needed:
- 14 - 1 1/16 inches Safety Pins
- 1 - 2 inch Safety Pin
- Seed Beads (refer to picture for colors needed)
Instructions:
Follow this pattern and the basic directions on the safety pin jewelry page to complete this project.
Each number column represents a pin.
- Your first pin will have 4 white beads, 1 red bead, 1 white bead, 1 red bead, then 3 more white beads.
- Pins number 2 and 3 each will have 5 white beads, 1 red bead, and then 4 more white beads.
- Pin number 4 will have 4 white beads, 3 green beads, and 3 white beads.
- Pin number 5 will have 3 white beads, 5 green beads, and 2 white beads.
- Pin number 6 will have 2 white beads, one green bead, 2 black beads, one green bead, 2 black beads, one green bead, and one white bead.
- Pins number 7 and 8 will each have 2 white beads, 7 green beads, and one white bead.
- Pins number 9 and 10 will each have 3 white beads, 5 green beads, and 2 white beads.
- Pin number 11 will have 4 white beads, 4 green beads, and 2 white beads.
- Pin number 12 will have 4 white beads, 5 green beads, and one white bead.
- Pin number 13 will have 5 white beads and 5 green beads.
- Pin number 14 will have 6 white beads and 4 green beads on it.
When you thread these beaded pins onto your larger pin, start with pin number 1.
--- Check out Bead Patterns by Topic
--- Check out Alphabetical Listing of Patterns
--- Check out Beaded Safety Pin Basic Directions